Joint-It Electric 2 Part Epoxy Grout Application Gun

Description

• The Electric Application Gun is intended for professional patio jobs. For touch-up jobs or testing, we recommend using the Manual Application Gun.
• The Electric Application Gun has six settings. We recommend using lower settings when getting familiar with using the Electric Application Gun, and you can increase the speed at your discretion.
• It is okay to use the Electric Application Gun without cutting the tip off the nozzle when using Settings 1-3. Just make sure to use it on a low setting, otherwise it will put additional pressure on the tubes.
• If you would like to use a faster setting, you will need to cut the end of the nozzle to create a larger gap. This is to prevent pressure building up in the tubes.
• If you would like to adjust the settings from three to six, whereby the product will come out faster, we recommend that you also cut a little bit off the top of the nozzle to allow more product to come out.  Failing to cut the nozzle with the gun running at full capacity will put the wall of the tubes under increased pressure.
• The electric application gun comes with two rechargeable batteries. We recommend charging both batteries prior to use.
• Make sure the tubes are positioned correctly in the Electric Application Gun before use. Watch the video below where we demonstrate how to position the tubes correctly in the Electric Application Gun.